Categories

False alarms and system glitches can be frustrating, and even worse, might prevent your security system from doing its job effectively. Luckily, most problems, from dead batteries to false alarms, are easy to fix. Explore our recommendations for troubleshooting your home alarm system in Wichita Falls. We’ll help you keep your household safeguarded and your system operating the way it should.

Test Your Home Security System In Wichita Falls

One effective way to troubleshoot your home’s security is to test it! The latest systems have a test mode so you don’t accidentally prompt an emergency response from monitoring agents. After moving to test mode, take these steps:

• Arm your system as you typically would when you head out.
• Open a door or window that has a contact sensor, or test other devices. Shut the window or door so it doesn’t prompt the alarm when you turn the system back on.
• Let the alarm resonate for 60 seconds to make sure a signal is dispatched to the security company and an entry is created in the alarm activity log.
• Continue testing equipment as needed
• Review the systems’s activity log to confirm that everything’s working.

Don’t worry, monitoring agents can tell that your alarm system is undergoing a test. Just make sure to switch off test mode when done. It’s wise to test monthly or whenever you change your home’s phone or internet connectivity.

Check The Position And Condition Of Motion Sensors

Although an crucial aspect of your alarm system, motion detectors are well known for false alarms. Prevent them with some simple troubleshooting.

• Do a physical check. Is there something that could shift within the path of the sensor, like drapery taken by a breeze?
• Is the sensor dirty? Cobwebs, dirt, and grime can lead to issues. Ensure the device is clean.
• Does the motion detector offer pet immunity you can enable? Some sensors can be set to disregard pets weighing as much as 100 pounds.
• When was the battery changed? Low batteries may impact performance or cause false alarms.
• Is the sensor facing a source of heat? Too much heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries Ready And Look Out For Low Battery Signals

One helpful benefit of the latest home security systems is that they’ll tell you when batteries are getting low. If your system is equipped with a mobile app or control panel, you’ll usually see notifications there. Depending on the alarm, you might hear an intermittent beep when batteries are low. 

Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that need to be replaced every so often. It’s best to keep batteries on hand and establish a replacement schedule. Top systems also come with a rechargeable backup battery for the main control panel. This battery helps keep your system running if your power goes out and should recharge once power is restored. If it fails to recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Wichita Falls 

As the leading name in home security, ADT designs systems that provide superior protection and functionality. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always be sent alerts when a sensor battery is running low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Wichita Falls home and family. Call (940) 217-5181 or submit our form today!